ØFree to set up time, value, given time, time for warning sound, and coin and memory mode.
ØControls up to 2 sets of USB device.
Input Voltage | DC+12V |
Standby | Display shows:00:00, rely: Normal Open (NO) |
Accumulated time | Yes, add time if receive signals again when time is running |
Device input | 2 set USB connector |
Output | 2 set USB connector |
How it works | |
Mode 1 | Time runs down after receive signals-> Display shows remaining time and supply power to device-> it cuts off power after time runs out |
Mode 2 (Connect a button) | Display shows remaining time after receive signals-> push button start-> time runs down and supply power to device-> it cuts off power after time runs out |
Pause (connect a button) | Push button pause: it cuts off power when pause, display shows remaining time.Re-supply power after push button pause again |
Price/time setting | Please reference to page 2 |
Operating Mode | Please reference to page 3 |
Connection and Position
Setting
Pleasefollow CODE ON DISPLAY and use button "S1" and "S2" to setup number
lINPUT SIGNAL QUANTITY AND TIME
1.Please press button "S4". "B" flashes.Please set up INPUT SIGNAL QUANTITY to active device (01-50).
2.Please press button "S4", "A" flashes.Please set up TIME (01-99).
3.Please press button "S4", "B" flashes.Please set up TIME (01-99).
4.Please press button "S4" 4 TIMES.
5.Please set up TIME for Warning Sound.
6.Please press button "S4" to finish.
lGIVEN TIME:Add time by free if input signals reach SETTING RATE during time is running.
Example Setting: input signalto active device: 01, input signals for given time: 03 give time: 02:10
Add time "02:10" free if receive "3 signals" duringtime is running.
1.Please press button "S4" 4 TIMES. "B"flashes. Please set up RATE OF INPUT SIGNAL QUANTITY.
2.Please press button "S4", "A" flashes.Please set up GIVEN TIME.
3.Please press button "S4", "B" flashes.Please set up GIVEN TIME.
4.Please press button "S4" to finish.
lMode Setting
Pleasefollow table to set up operating function:
1.Pleasehold on button "S1" and "S2" simultaneously for 3 secondsto get into MODE SETTING.
2.Pleaseuse button "S1" and button "S2" to set up number for CODE
3.Pleasepress button "S4" to switch to next code
Function | Code on Display | Description | |
A | B | ||
Running Time | 01 | 01 | Time runs down without pressing button |
02 | Time runs down by pressing button | ||
Time Type | 02 | 03 | MINUTE: SECOND |
04 | HOUR: MINUTE | ||
Memory | 03 | 05 | Yes: Remaining time keep running after power off and on |
06 | No: Standby power off and on | ||
Back to standby | 04 | 1-30 | user has no action after push buttons or receive signals in setting time |
Default: 01-03: Bold and base line. 04: not use the function. |
Size and Connection Example