Product Features
Connection Example
Input Voltage | DC+12V |
Standby | Display shows:00:00, rely: Normal Open (NO) |
Accumulated time | Yes, add time if receive signals again when time is running |
Max current load | 15A |
How it works | |
Mode 1 | Time runs down after receive signals-> Display shows remaining time and supply power to device-> it cuts off power after time runs out |
Mode 2 (Connect a button) | Display shows remaining time after receive signals-> push button start-> time runs down and supply power to device-> it cuts off power after time runs out |
Pause(connect a button) | Push button pause: it cuts off power when pause, display shows remaining time. Re-supply power after push button pause again |
Inbuilt Reset Counter | Inbuilt 9 digits reset counter |
Easy Setting: Set up based on code by 3 buttons
Big display shows:
(1) Balance
(2) H:M:S
Input signal: Pulse, NO
Competible with coin acceptor, bill acceptor, pulse NO input signal machine
Output: Switch control.
Relay open when standby
Relay connect when time is running.
2 mode operation:
(1) Pay->Time runs
(2) Pay->Push button->Time runs
Memory for power off and on: Setable
Setting: Product goes with manual
- Detail Connection shows on Manual
Add a Acrylic for Display if you need
Main board
Display
Control board*1 pcs
Wires*1 set
Manual*1