JY-23 Pulse to RS232 Signal Converter Coin Operated for Coin Acceptor Bill Acceptor PC COM USB to PULSE

Description

• Input Voltage: DC+12V

• Converter signal Pulse to RS232

• Connect coin acceptor to PC

• Send RS232 order to send a pulse siganl or output DC+5V

• Usage:

  

  
  

Control board Introduction                                                                                                  

1: DC 12V 5.5*2.1mm

2: Pulse input 1: Channel 1

3: Pulse input 2: Channel 2

4: output 1 pulse when receive order

5/6: output/no output 5V when receiver order

7: RS232 connector

D1: light when staying power on

D2: flash when sending 1 pulse

D3: light when 5&6 outputing 5V

D4: light after receive first order.

• Connector Define

Connection Example

RS232 Protocol

• Specification:
  (9600,N,8,1)                      Power consumption: 50MA
  Baud rate: 9600                   Send Display: Char Format
  Parity Bit: NONE                 Receive Display: Hex Format
  Data Bit: 8
  Stop Bit: 1

• Construction:
  Head (1) + Len (1) + Data (LEN) + XOR (1) + TAIL (1)
  Head (1): 0xF2
  Len (1): Data Length
  Data (Len): Length is based on Len (1)
  Xor (1): From Len (1) to Data (Len)
  Tail (1): 0xF3

• Send data when receive pulse in 100MS
  Len (1): 03
  Data: Channel (1) +Pn_LL(1) +Pn_HH(1)
  Note: Low position first then high position.
  Data = CMD (1) + Result (1)
  CMD (1): Respond “order byte”, 1 byte
  Result (1): Respond order result. 0x00 indicates success.
  If value is not 0x00, it indicates fail.

• Order Detail

------------------------------------Page 2--------------------------------------------

Video for Coin Acceptor                                                                           

JY-23 Manual Download